Specifications︰ Up to 2 Hp



The 506, 507 and 508 series drives break new ground in value for money DC motor control. Available in 3, 6 or 12A armature ratings, the feature packed minimum footprint design is ideal for speed or torque control of permanent magnet or shunt wound DC motors from single-phase supplies.



Highlights

Torque or speed control
IP20 protected covers
DIN rail mounting
Switch selectable 110 or 230 vac supply
Switch selectable tachometer or armature voltage feedback


Inputs/Outputs

Analog Inputs - 5;
Speed Setpoint
Auxiliary Setpoint
Torque or Current Limit
Zero Speed Threshold (+10V);
Tachometer Feedback (200 VDC max.)
Digital Inputs - 1;
Start-Run (+10V)
Digital Outputs - 2;
Healthy
Zero Speed Interlock (16V 50mA)
Reference Supplies - 1;
+10 VDC
LED Diagnostics - Power On, Health


Potentiometer Adjustments

Maximum speed / Minimum speed / Current limit / Acceleration ramp (1-15 seconds) / Deceleration ramp (1-15 seconds) / IR compensation / Speed stability


Switch Adjustments

Armature Current Calibration / Armature Voltage Calibration / Tachometer Feedback / Supply Voltage Select


TECHNICAL SPECIFICATION

506/507/508 DC Drives



Power Supply - Main supply; 110-240 VAC ?0%; Single-phase 50-60 Hz ? Hz 512C/514C

Power Supply - Main supply; 110-480 VAC ?0%; Single-phase 50-60 Hz ? Hz

Auxiliary supply; 110-120, 220-240, or 380-415 (512C only) VAC ?0% user selectable.

All Drives Field Supply - 0.9 X Main Supply voltage; 2A for 506/507/508 and 3A for 512C/514C maximum

Ambient - 0-45°C (32-113°F), up to 1000m (3280 ft) ASL without derating

Overload - 150% for 60 second



STANDARDS

The 506/507/508 series meets European and North American standards when installed in accordance with relevant product