Specifications︰ Up to 7.5 Hp



Highlights

Four quadrant regenerative control

Torque or speed control

Many system features

Extremely linear control loops

5570 diagnostic compatible



The regenerative 514C DC drive offers full four-quadrant control of dc motors from single-phase supplies. As such it is ideal for applications involving overhauling loads or where rapid and accurate deceleration is required. Together with the non-regenerative 512C, they offer the perfect solution for lower power single motor and multi-drive applications.



Inputs/Outputs

Analog Inputs - 6;

Speed Setpoint

Positive Trim Setpoint

Negative Trim Setpoint

Current Demand (?0V)

Current Limit (?.5VDC)

Tachometer Feedback (?50 VDC max.)

Analog Outputs - 5;

Ramp Setpoint

Total Setpoint

Speed

Current Demand (?0V)

Current Output (?V)

Digital Inputs - 3;

Start-Run

Enable (24 VDC)

Stall Override (+10 VDC)

Digital Outputs - 2;

Health

Zero Speed (24 VDC 50mA)

LED Diagnostics

Power On

Stall Trip

Overcurrent Trip

PLL Lock

Current Limit

Reference Supplies - 3;

-10 VDC

+10 VDC

24 VDC

Thermistor ?1



Potentiometer Adjustments

Maximum Speed / Current Limit / Acceleration Ramp (0-40 seconds) / Deceleration Ramp (0-40 seconds) / IR Compensation / Speed Loop Gain - Proportional / Speed Loop Gain - Integral / Current Gain - Proportional / Current Gain - Integral / Zero Speed Offset / Zero Speed Threshold


Switch Adjustments

Armature Current Calibration / Armature Voltage Calibration / Tachometer Feedback / At Zero Speed/Setpoint / Current / Meter Output / Ramp Isolate / Standstill Logic / Current Demand / Overcurrent Trip / Setpoint Comparator / Supply Voltage Select ?Jumpers


STANDARDS

The 514C series meets European and North American standards when installed in accordance with relevant product manual.