Product Description

DTA Series

DTA series is designed for practical applications with 3 most-frequently adopted signal outputs in the industry and is built-in with various handy functions and transmission structure, ensuring fast and stable transmission of data.                 Blower coil pipe in central air-conditioning system, heating system.               Specifications         PID / On-Off/ manual input control modes     Auto-tuning PID parameters     Various thermocouple (B, E, J, K, L, N, R, S, T, U, TXK) and platinum RTD (PT100, JPT100) can be set by parameters     Built-in 2 groups of alarm switches with 13 alarm modes each     Celsius or Fahrenheit temperature display     2 key lock functions: (1. lock all keys; 2. lock only function key, up/down keys are still workable)     Panel size: 4848, 4896, 9648, 7272, 9696     Optional RS-485 communication interface (Modbus ASCII, RTU, baud rate: 2,400 ~ 38,400)     Optional CT (wire breaking detection) function, an alarm output     Sampling time of sensor: 0.5 second/time     Certifications: IP5X protection, CE, UL

DTB Series

Compared with DTA series, DTB is additionally equipped with linear voltage signal output and dual output control, capable of executing heating and cooling controls simultaneously in a temperature control system and fast reaching the target temperature.           Applications     Blower coil pipe in central air-conditioning system, heating system.               Specifications         PID / On-Off / manual input / programmable control modes     2 groups of outputs to auto-tuning 2 groups of PID parameters     Able to connect to various thermocouples (B, E, J, K, L, N, R, S, T, U, TXK), platinum RTD (PT100, JPT100), analog current (0 ~ 20mA, 4 ~ 20mA) and linear voltage (0 ~ 5V, 0 ~ 10V)     Maximum 3 groups of alarm switches are available, with 18 alarm modes each     Celsius or Fahrenheit temperature display     2 key lock functions (1. lock all keys; 2. lock only function keys, up/down keys are still workable)     Panel sizes: 4824, 4848, 4896, 9696     Built-in RS-485 communication interface (Modbus ASCII, RTU, baud rate: 2,400 ~ 38,400)     Sampling time of thermocouple/platinum RTD: 0.4 second/time; sampling time of analog input: 0.15 second/time     Programmable logic controller is able to set up 64 sets of temperature and control time.     Optional CT (wire breaking detection) function, an alarm output     Optional Event function, using PLC or switches to switch between 2 different set temperatures.     Optional Valve function, adjusting the open/close of the valve by the output value.

Specifications︰ Temperature controller is a measurement device used on temperature control. Thermocouple-type and resistor-type temperature controllers measure temperature electronically, obtaining the temperature change from the sensor and sending the measured data to the electronic processor. The output device will then control the temperature variation within a specific range.

Delta's DT series temperature controller has fast output response, accurate PID parameter auto-tuning, support Modbus communication protocol and is built-in with various output types, allowing different systems to reach a stable control status very quickly. Besides, all series are complied with international

Advantages︰
Product List

DTK Series
Advanced Intelligent Temperature Controller



DT3 Series
Standard Temperature Controller


DTA Series


DTB Series

DTC Series

DTD Series

DTV Series

DTE Series

Min Order︰ 1

Ship Date︰ IN STOCKS

Standard Met︰ UL CE, CCC,

Product Image