1/8 - 25 Horsepower
The V1000 is a world-class compact current vector drive that defines a new world standard. Demands for efficient production and better maintainability are on the rise, spurred by global competition. Yaskawa pays off the promise of being in control with products that make businesses move. The optimum balance of energy input, product output, maintenance risk, and long life is reached with Yaskawa.
The V1000 provides a world of power in the palm of your hand!
|
Specifications and Features for V1000 Drive
|
|
The V1000 is a world-class compact current vector drive that defines a new world standard. Demands for efficient production and better maintainability are on the rise, spurred by global competition. Yaskawa drives have earned a reputation for high performance, high functionality, and high quality. The V1000 provides a world of power in the palm of your hand!
Performance Features
- Ratings: 1/8 to 5 HP at 240 VAC 1-ph,
1/8 to 25 HP (ND) at 240 VAC 3-ph,
1/2 to 25 HP (ND) at 480 VAC 3-ph
- Overload Capacity:
150% for 60 sec. (Heavy Duty)
120% for 60 sec. (Normal Duty)
- Control Methods: V/f Control,
Open Loop Current Vector Control,
PM Open Loop Current Vector Control
Simple closed loop speed control
- DC injection braking, ramp to stop
- Electronic reversing
- Adjustable accel/decel:0.01 to 6000 seconds
- Controlled speed range:
40:1(1) 100:1(2)
- Speed Regulation:
± 0.5 to 1% with slip compensation(1)
± 0.2%(2)
- Displacement power factor: 0.98
- Output frequency: 0 to 400 Hz
- Frequency resolution:
0.01 Hz with digital reference
0.06 / 60 Hz with analog reference
- Frequency accuracy:
0.01% with digital command
0.5% with analog command
- Volts / hertz ratio: infinitely adjustable pattern
- DC Injection braking: adjustable amplitude, duration, current limited
- Torque boost: full range, auto
- Power loss ride-thru: 0.5 sec.
- Speed search
- Auto restart
- 3 Critical frequency rejection settings
- Slip Compensation
- Energy $avings Function
- Enhanced PID with loss of feedback function
Protective Features
- Current limit, stall prevention during accel, decel, and run
- Motor and drive overload
- Over voltage prevention function
- Instantaneous over current
- Short circuit
- Under voltage
- Heatsink overheat
- Ground fault protection
- Over/under torque
- Short circuit current rating: 30KA rms sym.
Options
- Dynamic Braking resistor (external)
- Multi-lingual, full-text remote LCD
- Profibus-DP, DeviceNet Communications
- Modbus TCP/IP, EtherNet/IP Communications
- DriveWizard Plus
- CASE software
- DIN Rail Mounting Kit
- USB Copy Unit (Y-stick)
|
Design Features
- Dual microprocessor logic
- Digital keypad operator, 5 digits
- LED status display
- Remote Mount Keypad Capability
- RJ-45 Style Digital Operator Connector
- 7 multifunction digital inputs
- 3 multifunction digital outputs
- Hardwire baseblock (EN954-1 Cat. 3)
- Programmable form C output contact for customer use: 1A at 250 VAC or 30 VDC
- 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)
- Carrier frequency: 15 kHz max; swing PWM
- 16 multi-speed settings plus jog speed
- 2 Remote speed references
0-10 VDC (20 kohms) or isolated 4-20 mA (250 ohms)
- Signal follower: bias and gain
- 2 programmable open collector outputs
- Analog monitor output:
0-10 VDC proportional to output frequency or output current
- Approx. 400 parameters & monitors
- Digital pulse train input (33 kHz max.)
- Cooling fan controlled by drive run/stop
- RS-422/485 MODBUS 115 kbps
- UL recognized electronic overload
- MTBF 28 years
- Built-in Dynamic Braking Transistor
- NEMA 1 enclosure
- Side-by-Side mounting
- Application Presets
- Maintenance monitors
Service Conditions
- Ambient service temperature:
-10° to 40°C (14° to 105°F) NEMA 1
-10° to 50°C (14° to 122°F) Open Chassis
- Ambient storage temperature:
-20° to 60°C (-4° to 140°F)
- Humidity: to 95% non-condensing
- Altitude: to 3300 ft; higher by derating
- Service factor: 1.0
- Input voltage: -15% to +10%
200 to 240 VAC, 380 to 480 VAC
- Input frequency: +/-5%; 50/60 Hz
- Input Phase sequence insensitive
Standards
- UL 508C (Power Conversion)
- CSA 22.2 No. 14-95 (Industrial Control Equipment)
- UL, cUL listed; CE marked
- RoHS compliant
- EN 50178 (LVD)
- EN 50081-2, EN 50082-2 (EMC)
- EN 954-1, Category 3 Safety Standard
- EN 61800-3
- IEC 529, 146
- FCC CFR 47 Part 15 Subpart B (w/ External Filter)
- TUV
|
|
| CIMR-VB4A0002BAA |
0.4kw |
| CIMR-VB4A0004BAA |
0.75kw |
| CIMR-VB4A0005BAA |
1.5kw |
| CIMR-VB4A0007BAA |
2.2kw |
| CIMR-VB4A0009BAA |
3.0kw |
| CIMR-VB4A00011BAA |
3.7kw |
| CIMR-VB4A00018FAA |
5.5kw |
| CIMR-VB4A00023FAA |
7.5kw |
| CIMR-VB4A00031FAA |
11kw |
| CIMR-VB4A00038FAA |
15kw |
|
|
|
|
| Min Order︰ | 1 |
| Ship Date︰ | on stocks |
|
|
Product Image
|
